Part Number Hot Search : 
TBB1004 S04RP EG1125 SLE66C N25F80 N5400 PEB2086 TC1029
Product Description
Full Text Search
 

To Download SP1938S26RGB Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 SP1938
DC-DC Step-Up Converter for White LED
DESCRIPTION The SP1938 is a step-up DC/DC converter for white LED driver with over voltage protection. The device can driver one to four LEDs in series from a single cell Lithium Ion battery. Internal functions include current limiting; thermal shutdown; OVP and soft-start to prevent damage operate status. The SP1938 operates at 0.8MHz and from low input voltages as low as 1.5V; apply to Lithium-Ion powered systems. A low 95mV reference voltage minimizes power loss in the current setting resistor for better efficiency. The SP1938 is available in small package SOT-23-6L. APPLICATIONS Battery Power Equipment Notebook Computers PDA Cellular Phone
FEATURES Current Source with Over Voltage Protection Fast 0.8MHz Switching Frequency High Efficiency up to 87% Drives up to Four LEDs From 3.2V Supply Drives up to Six LEDs From a 5V Supply Low Quiescent Current Disconnects LEDs in Shutdown Mode Internal Over Temperature and Current Limiting Shutdown Function Internal Soft-Start Circuit 36V Rugged Bipolar Switch Available in a Small SOT-23-6L Package
PIN CONFIGURATION(SOT-23-6L)
PART MARKING
2009/03/30 Ver.1
Page 1
SP1938
DC-DC Step-Up Converter for White LED
TYPICAL APPLCATION CIRCUIT
PIN DESCRIPTION Pin 1 2 3 4 5 6 Symbol SW GND FB SHDN OVP VIN Connect inductor/diode here Ground Pin Connect cathode of lowest LED and resistor here Combined active low enable and PWM control pin for LED dimming Over voltage Protection and Connect to the output capacitor of the Converter Supply Voltage Input Description
ORDERING INFORMATION Part Number Package SP1938S26RGB SOT-23-6L Week Code : A ~ Z( 1 ~ 26 ) ; a ~ z( 27 ~ 52 ) SP1938S26RGB : Tape Reel ; Pb - Free ; Halogen -Free Part Marking 98YW
2009/03/30 Ver.1
Page 2
SP1938
DC-DC Step-Up Converter for White LED
BLOCK DIAGRAM
ABSOULTE MAXIMUM RATINGS (TA=25 Unless otherwise specified) Parameter DC Supply Voltage SW Voltage FB Voltage SHDN Voltage Operating Temperature Maximum Junction Temperature Storage Temperature Symbol VIN VSW VFB VSHDN TOPR TJ(Max) TS Value 18 36 7 7 -4085 125 -65150 Unit V V V V
The IC has a protection circuit against static electricity. Do not apply high static electricity or high voltage that exceeds the performance of the protection circuit to the IC.
2009/03/30 Ver.1
Page 3
SP1938
DC-DC Step-Up Converter for White LED
ELECTRICAL CHARACTERISTICS (TA=25, VIN=3V, VSHDN=3V, Unless otherwise specified) Parameter Operating Voltage Feedback Voltage FB Pin Bias Current Supply Current Switching Frequency Maximum Duty Cycle Switch Current Limit Switch Leakage Current Switch Saturation Voltage SHDN Voltage High SHDN Voltage Low SHDN Pin Current Over Voltage Protection APPLICATION CIRCUIT Conditions ISW=100mA, Duty Cycle = 66% VSHDN = 0V 0.8 Vsw= 5V Isw = 200mA 1.5 0.4 VOUT rising 90 21 Min. 2.5 86 Typ. Max. 18 110 150 3.5 1.0 1.6 5 Unit V % nA mA A MHz % mA A mV V V uA V
2.8 0.1 1.2 85 320 0.01 150
2009/03/30 Ver.1
Page 4
SP1938
DC-DC Step-Up Converter for White LED
SOT-23-6L PACKAGE OUTLINE
2009/03/30 Ver.1
Page 5
SP1938
DC-DC Step-Up Converter for White LED
Information provided is alleged to be exact and consistent. SYNC Power Corporation presumes no responsibility for the penalties of use of such information or for any violation of patents or other rights of third parties which may result from its use. No license is granted by allegation or otherwise under any patent or patent rights of SYNC Power Corporation. Conditions mentioned in this publication are subject to change without notice. This publication surpasses and replaces all information previously supplied. SYNC Power Corporation products are not authorized for use as critical components in life support devices or systems without express written approval of SYNC Power Corporation. (c)The SYNC Power logo is a registered trademark of SYNC Power Corporation (c)2004 SYNC Power Corporation - Printed in Taiwan - All Rights Reserved SYNC Power Corporation 7F-2, No.3-1, Park Street NanKang District (NKSP), Taipei, Taiwan 115 Phone: 886-2-2655-8178 Fax: 886-2-2655-8468 http://www.syncpower.com 2009/03/30 Ver.1 Page 6


▲Up To Search▲   

 
Price & Availability of SP1938S26RGB

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X